Automatic strapping machine Itipack SKE/FLR

Automatic taping machine designed for taping coil products using steel tape – the tape is inserted through the centre of the coiled coil.

Technical data Itipack SKE/FLR12
Approximate dimensions	2030 x 1300 x 3360 mm (L x W x H)
Approximate weight	10000 kg
Power	400 V / 50 Hz (other on request)
Installed power	12 kW
Coil height (in the direction of the hole)	20-600 mm
Inner diameter of the coil	508-610 mm
Outer diameter of the coil	800-1800 mm
Working pressure	0,6 Mpa
Air consumption	50 lt/cycle
Time 1 taping cycle	approx. 15 seconds/cycle
Technical data of the VS11 strapping head
Drive	Electropneumatic
Types of tape	Standard / Extra-flexible / Extra-strong
Tape width	19 / 25 / 32 mm
Tape thickness	0.63-1 mm (for extra strong max 0.8 mm)
Power	24-220 V, AC (50/60 Hz) / DC
Electricity consumption	1 kW
The power of tensioning	1500-9000 N
Tensioning speed	1.5-2.5 m/s
Type of joint	tape cut 3 + 3
Efficiency of the joint	75-85%
Technical data of the VS12 strapping head
Drive	Electropneumatic
Types of tape	Standard / Extra-flexible / Extra-strong
Tape width	19 / 25 / 32 mm
Tape thickness	0,63 – 1 mm (for extra strong max 0,8 mm)
Gas type	Argon 4.6 (99.996%)
Power	24-220 V, AC (50/60 Hz) / DC
Electricity consumption	11 kW
The power of tensioning	1500-9000 N
Tensioning speed	1.5-2.5 m/s
Type of joint	Single point weld
Efficiency of the joint	75-85%
Gas consumption per 10000 connections	50 lt

SKE/FLR-12